| 保質期 | 12（個月） |
|---|---|
| 產地 | 河北衡水 |
| 工作溫度 | 0-45（℃） |
| 功能 | 密封 |
| 銷售方式 | 直銷 |
| 用途范圍 | 建筑 |
| 有效期 | 24個月 |
| 粘度 | 10 |
| 執行質量標準 | 國標 |
| 貿易屬性 | 內貿 |
| 分類 | 密封膠 |
| 粘合材料類型 | 橡膠類 |
| 發貨期限 | 3天 |
| 樹脂膠的分類 | 聚氨酯膠 |
| 熱熔膠類型 | 包裝熱熔膠 |
| 品牌 | 瑞博 |
| 型號 | SGJL |
| 粘合材料 | 金屬 |
| 固化方式 | 室溫固化 |
歡迎來電：131 6657 0832
聚硫密封膠是以液態聚硫橡膠為主體材料，配合以增粘樹脂、硫化劑、促進劑、補強劑等制成的密封膠。此類密封膠具有優良的耐燃油、液壓油、水和各種化學藥品性能以及耐熱和耐大氣老化性能。
Polysulfide sealant is a kind of sealant made of liquid polysulfide rubber, which is made up of tackifier resin, vulcanizing agent, accelerator and reinforcing agent. This kind of sealant has excellent properties such as fuel oil, hydraulic oil, water and various chemicals, as well as heat and atmospheric aging resistance.性能
performance
1、此類密封膠具有優良的耐燃油、液壓油、水和各種化學藥品性能以及耐熱和耐大氣老化性能。
1. This kind of sealant has excellent properties such as fuel oil, hydraulic oil, water and various chemicals, as well as heat resistance and atmospheric aging resistance.
2、具有良好的柔軟性、低溫饒曲性及電絕緣性。
2. It has good flexibility, low temperature, bending and electrical insulation.
3、對大部分材料都有良好的粘附性。
3. Good adhesion to most materials.
classification
一般為可硫化型。按組分可分為雙組分(或三組分)和單組分型。其加工采用預混-研磨-灌裝的工藝方法。聚硫密封膠廣泛用于土木建筑、汽車制造等行業作為嵌縫、密封材料，還常用于各類油箱、燃料罐、航空機械、復合玻璃的密封。
Generally curable type. Components can be divided into two components (or three components) and a single component type. The process of mixing, grinding and filling is adopted. Polysulfide sealant is widely used in civil construction, automobile manufacturing and other industries as caulking and sealing material, is often used for sealing all kinds of fuel tank, fuel tank, air machine, composite glass.
應用
application
聚硫密封膠適用于中空玻璃密封、金屬、混凝土幕墻接縫、地下工程（如隧道、洞涵）、水庫、蓄水池等構筑物的防水密封，以及公路路面，飛機跑道等伸縮縫的伸縮密封、建筑物裂縫的修補恢復密封。
Polysulfide sealant for insulating glass sealing, metal, joints, concrete wall underground engineering (such as tunnel, cave), reservoirs, reservoirs and other structures of waterproof sealing, and road repair, restore the telescopic runway expansion joint sealing, sealing the crack of building complex.
注意事項
Matters needing attention
注意事項：
Matters needing attention：
1、 不能與硅硐密封膠摻合使用，否則會影響其粘結性能。
1, it can not be mixed with silicone sealant, otherwise it will affect its bond performance.
2、 施工溫度在5℃以上，否則會影響其粘結性和固化速度。
2, construction temperature above 5 degrees, otherwise it will affect the adhesion and curing speed.
3、 施工前做小樣試驗。
3. Do sample test before construction.
Storage condition:
遠離火源，避免通風，溫度在5℃～30℃。
Keep away from fire source and avoid ventilation. The temperature is between 5 and 30 degrees centigrade.
使用方法
Usage method
1、手工施工時，將 A 、 B 兩組份按比例( 10:1 )稱量并用油灰刀混合均勻，填入密封槽中，壓實、填平、除去多余的膠液。要注意用力沿一個方向反復刮涂，防止大量氣泡混入膠內。
1, manual construction, A, B two groups according to proportion (10:1) weighing and mixing with a putty knife, fill in the sealing groove, compaction, fill, remove excess glue. Should pay attention to force along the direction of repeated scraping, to prevent a large number of bubbles mixed with gum.
2、機械施工時，是由自動計量和混合裝置( 10:1 )完成混膠，經手動注槍或全自動噴膠機來控制涂膠量和涂膠速度。用注膠槍施工時要報持槍嘴沿一個方向勻速地移動，確保填滿膠料防止移動過快或往復而產生氣泡。
2, mechanical construction, is composed of automatic metering and mixing device (10:1) complete mixing, by manual or automatic spray gun injection machine to control the speed of coating and coating. When the glue gun is used, it should be reported that the arms are moved in one direction at a constant speed, so as to ensure that the filling material is filled so as not to move too quickly or to generate bubbles when reciprocating or reciprocating.
用途
purpose
1、用于底盤、車廂外部焊縫的防水防銹保護。
1 、 used for waterproof and antirust protection of the outer welding seam of chassis and carriage.
2、用于頂棚、廂體、地板的金屬、木材、塑料、泡沫等材料接縫的粘接和密封。
2, for ceiling, car body, floor of metal, wood, plastic, foam and other materials of the joint bonding and sealing.
3、用于頂棚、廂體、地板的金屬板固定螺釘、鉚釘的防水及防銹密封等。
3, for ceiling, car body, floor metal plate screws, rivets waterproof and rust prevention, sealing and so on.
