| 類別 | 有機膨潤土用 |
|---|---|
| 粒度/目數 | 325（目） |
| 原產地 | 信陽 |
| 顏色 | 白色 |
| 蒙脫石≥ | 70（％） |
| PH值 | 7 |
| 白度 | 95 |
| 密度 | 2.5（g/cm3） |
| 表觀粘度 | 50（mPa.s） |
| 硬度 | 2 |
| 膨脹倍數 | 15 |
鈉 基 膨 潤 土
膨潤土(Bentonite)按譯音、成因及用途又稱斑脫巖、膨土巖等，是以蒙脫石(也稱微晶高嶺石、膠嶺石)為主要成分的粘土巖—蒙脫石粘土巖,常含少量伊利石、高嶺石及沸石、長石、方解石等。蒙脫石為少量堿及堿土金屬的含水鋁硅酸鹽礦物。
由于蒙脫石層間水和層間可交換陽離子存在，按蒙脫石所含可交換陽離子種類、含量和結晶化學性質等,可將膨潤土劃分為鈉基膨潤土(堿性土)、鈣基膨潤土(堿土性土)和天然漂白土(酸性土或酸住白土)三種。
物理性質：
顏色一般為白色,淡黃,因含鐵量變化又呈淺灰、淡綠粉紅、褐紅、黑雜等色。具蠟狀、土狀或油脂光澤。
化學成份：
膨潤土www.xyzszzy.com的主要化學組分是二氧化硅(SiO2),三氧化二鋁(Al2O3)和水。氧化鐵和氧化鎂含量有時也較高。此外,鈣、鈉、鉀等常以不同含量存在于膨潤土中。膨潤土的Na2O和CaO含量對膨潤土的物理化學性能和工藝技術性能影響頗大。
理化性能：
膨潤土具有吸濕性，能吸附8～15倍于本體積的水量。吸水后膨脹，能膨脹數倍，可達30余倍。在水介質中能分散呈膠體懸浮液，這種懸浮液具有一定的粘滯性、觸變性和潤滑性。它和水、泥或砂等細碎屑物質的摻合物有可塑性和粘結性。有較強的陽離子交換能力。對各種氣體、液體、有機物質有一定的吸附能力，最大吸附量可達5倍于它的重量，具有表面活性的酸性漂白土能吸附有色物質。
膨潤土的理化性能主要取決于它所含的蒙脫石種類和含量。一般鈉基膨潤土較之鈣基或鎂基膨潤土的物理化學性質和工藝技術性能優越。主要表現在：吸水速度慢，但吸水率和膨脹倍數大；陽離子交換量高；在水介質中分散性好，膠質價高；它的膠體懸浮液觸變性、粘度、潤滑性好，pH值高；熱穩定性好；有較高的可塑性和較強的粘結性；熱濕拉強度和干壓強度高。所以鈉基膨潤土的使用價值和經濟價值較高。
鈉基膨潤土的應用：
①在機械鑄造業中，可作鑄造型砂、粘結劑，可以克服鑄件的“夾砂”“起皮”現象，降低鑄造件廢品率，保證鑄件的精度和光潔度。
②在造紙工業中，用作紙張的填充劑，增強紙張的光亮度。
③利用本產品的強粘結性能，用于白乳膠、地板膠、漿糊等的制作。
④因其有穩定的懸浮性、增稠性，能有效地托浮分散粉體，可作水性涂料的增稠防沉淀助劑。
⑤同時利用它的優良的分散性和膨脹性，高造漿率、低失水量及膠體性能和剪切稀釋能力，可以用作鉆井泥漿用鈉土。
鑄造性能：
項目指標級別 | 熱濕拉強度 | 濕壓強度 | 膠體率 | 膨脹倍數 | 200目通過量 | 含水率 | 造漿率 |
Mpa | Mpa | % |
| % | % |
| |
一級 | 2.5 | 0.0049 | 100 | 25~30 | 95 | ≤10 | ≥16 |
二級 | 2~2.5 | 0.00294~0.0049 | 100 | 18~25 | 90 | ≤12 | ≤15 |
乳膠、涂料性能指標：
項目 | 白度 | 粘度 | 膠質價 | PH值 | 水份 | 膨脹容 | 粒度 |
% | PS | ml/15g± | % | ml/g± | |||
指標 | ≥75 | ≥2.8 | ≥90 | 8~10 | ≤10 | ≥20 | 300~325 |
英文版The English version
Sodium machine swelling soil
Bentonite clay (Bentonite) in transliteration, causes and use is also called spot to take off the rock, Bentonite, etc., is based on montmorillonite (also known as microcrystalline kaolinite, montmorillonite) as the main component of clay rock - montmorillonite clay rock, often contain small amounts of illite and montmorillonite, zeolite, feldspar, calcite, etc. Montmorillonite is a small amount of alkali and alkaline earth metal hydrous aluminum silicate minerals.
Because of montmorillonite interlayer water and interlayer exchangeable cations, in accordance with the montmorillonite content of exchangeable cation type, content and crystal chemistry, etc., can be divided into sodium base bentonite bentonite (alkaline soil), calcium base bentonite (alkali) native soil and natural bleaching earth lived (acidic soil or clay) three kinds.
Physical properties:
Color general for white, weak yellow, because of iron content change in light grey, light green, pink, brown color, red, black etc. With waxy luster, earthy or grease.
Chemical composition:
Bentonite silica (SiO2) is the main chemical composition, 3 oxidation 2 aluminium (Al2O3) and water. Iron oxide and magnesium oxide content sometimes higher. In addition, calcium, sodium, potassium, etc often exist in different content in bentonite. Bentonite Na2O and CaO content on the physical and chemical properties of bentonite and technology performance impact is quite big.
The physical and chemical properties:
Bentonite has hygroscopicity, can adsorption 8 ~ 15 times the volume of water. After water absorption expansion, can expand to several times, can reach more than 30 times. That can disperse in water medium in colloidal suspension, the suspension has certain viscosity, thixotropy and lubricity. It with water, mud or sand and fine detrital material blending has plasticity and sintering. Has the strong cation exchange capacity. For a variety of gases, liquids, has certain adsorption ability of organic matter, up to 5 times the maximum adsorption of its weight, has the surface activity of the acid bleaching earth can adsorption non-ferrous material.
Physico-chemical properties of the bentonite contained mainly depends on its content and the types of the montmorillonite. General sodium base bentonite than calcium or magnesium based bentonite technologies of chemical and physical properties and superior performance. Mainly displays in: the water absorption speed is slow, but multiple large water absorption rate and inflation; High cation exchange capacity; Good dispersibility in water medium and high colloid valence; Its thixotropy and viscosity, good lubricity, colloidal suspension of high pH value; Good thermal stability; Have higher plasticity and strong caking property; Hot wet tensile strength and high dry strength. So the use of sodium base bentonite value and economic value is higher.
The application of sodium base bentonite:
(1) in the mechanical casting industry, as a foundry sand, binder, which can overcome the "sand" of casting "peeling phenomenon, reduce the casting scrap rate, ensure the accuracy of castings and finish.
(2) in the papermaking industry, is used as paper filler, enhance the brightness of paper.
3. Use of this product strong bonding performance, production for white latex, floor glue, paste, etc.
(4) because of its stable levitation, thickening, can effectively support distributed powder, as a water-based paint thickening additives precipitation.
5. At the same time take advantage of its excellent dispersibility and expansibility, high mud making rate, low fluid loss and colloidal properties and shear dilution ability, can be used as a drilling mud used sodium soil.
The casting performance:
Project target level
Hot wet tensile strength
Wet strength
Colloid rate
Expansion ratio
200 mesh by volume
The moisture content
Mud making rate
mpa
mpa
%
%
%
Level 1
2.5
0.0049
100
25 to 30
95
10 or less
16 or higher
The secondary
2-2.5
0.00294 ~ 0.0049
100
18 ~ 25
90
12 or less
15 or less
Emulsion, coating performance indicators:
project
White degree
viscosity
Colloid valence
The PH
The moisture
Expansion of capacity
Particle size
%
Ps
15 ml/g -
%
Ml/g -
indicators
75 or more
2.8 or higher
90 or more
8 ~ 10
10 or less
Two or more
300-325